GleeWork Services
Concrete Contractor
in Crossville, TN
GleeWork is your concrete contractor in Crossville — patios, walkways, and driveways poured right with proper base prep, reinforcement, and finishing that holds up in Middle Tennessee's climate.
Built to Last. Installed to Spec.
Most concrete failures come from one thing: a bad base. Concrete laid over uncompacted or unstable soil will shift, crack, and heave regardless of how thick the pour is. GleeWork starts every concrete project with proper excavation, base material selection, and mechanical compaction before a single yard of concrete is ordered.
We reinforce every pour with rebar or wire mesh, place control joints at calculated intervals, and finish to your specification. Whether that's a standard broom finish, exposed aggregate, or a smooth trowel — the structural integrity underneath is the same.
What We Pour
Each concrete project has different requirements. Here's what goes into each type.
Concrete Patios
A concrete patio is one of the most durable outdoor living surfaces you can install. GleeWork pours patios with proper sub-base compaction, rebar or wire mesh reinforcement, and control joints placed strategically to manage cracking. We finish surfaces to your preference — broom-finished for grip, exposed aggregate for texture, or smooth-troweled for a clean modern look.
Concrete Walkways & Sidewalks
Cracked, heaved, or uneven sidewalks are a safety hazard and an eyesore. We remove old concrete, prepare a proper compacted base, and pour new walkways with the correct slope for drainage. All paths are formed, reinforced, and finished to match your home's aesthetic.
Concrete Driveways
A concrete driveway handles heavy vehicle loads when built correctly. GleeWork installs driveways with 4–6" of compacted base, 4" minimum concrete thickness (thicker at edges), proper control joint spacing, and finished edges. We ensure positive drainage away from your home on every pour.
How Every Pour Starts
No shortcuts. Every project follows the same proven sequence.
Layout & Excavation
We stake out the project, establish grade and slope with a transit level, then excavate to the correct depth — removing any soft or unstable soil before anything is placed.
Base Preparation
Crushed stone base is spread in lifts and compacted with a plate compactor or roller. This is what prevents settling. No pour happens without a solid, mechanically compacted base.
Forming & Reinforcement
Wood or metal forms are set to the exact pour dimensions. Rebar or wire mesh is positioned at the correct height in the slab. Fiber is added to the mix on most projects.
Pour, Finish & Joint
Concrete is ordered to spec, poured, screeded, and finished to your preference. Control joints are cut or tooled at proper intervals. Curing compound is applied for weather protection.
Poured vs. Stamped/Decorative Concrete
Standard Poured Concrete
Broom-finished or exposed aggregate. Lower cost, functional, clean appearance. Best for utility areas, driveways, and projects where budget is the primary driver.
Cost range: $8–$15 per square foot installed
Stamped / Decorative Concrete
Textured and colored to mimic stone, slate, or brick patterns. Higher visual impact but requires sealing every 2–3 years and is more difficult to repair if cracking occurs.
Cost range: $15–$30 per square foot installed
Considering concrete for a patio but want the look of stone? See our paver patio service → Pavers outperform concrete in the Plateau's freeze-thaw climate and offer easier repairs over the long term.
Common Questions About Concrete
Ready for a concrete estimate?
Free on-site consultations across Crossville, Cookeville, and surrounding Middle Tennessee.
Luna
GleeWork Assistant · Typically replies instantly